Backtrack 4 – USB/Persistent Changes/Nessus 4.02

This is the Backtrack 4 How-to for version 4.02 of Nessus which uses the seperate client.

If you prefer an off-line version of the how-to, you can grab a PDF version from here.

This how-to will show you a method for building a USB thumb drive with the following features:

  • Persistent Changes - Files saved and changes made will be kept across reboots.
  • Nessus and NessusClient installed - Everybody needs Nessus 🙂
  • Encryption configured (Note: This is not whole drive encryption)

We will also tweak a few things and make some interesting changes.

Table of contents:

Tools and Supplies
Partition the USB thumbdrive
Make a bootable Backtrack 4 USB thumbdrive
Persistent Changes
Install Nessus
Configure Encryption
Tweak a few things


Tools and Supplies

  1. A USB thumbdrive - minimum capacity 4GB
  2. A Backtrack 3 CDROM, Backtrack 4 DVD or an additional USB thumbdrive  (minimum 2GB) - Used to partition the thumbdrive.
  3. Optional: UNetbootin - A tool to transfer an iso image to a USB drive.

Let's get started!

Let's grab a copy of the Backtrack 4 Pre Release ISO.

Description: DVD Image
Name:: bt4-pre-final.iso
Size: 1390 MB
MD5: b0485da6194d75b30cda282ceb629654
Download: Click here

Now that we have the goods in hand, we can get to cooking. This tutorial is based on booting Backtrack 4 first. This means that you need some form of bootable Backtrack 4 media. This can be a virtual machine, DVD, or USB drive. Use your favorite method of creating a DVD or USB drive or you can use UNetBootin to create the thumb drive.  Below is a screenshot of using UnetBootin to install Backtrack 4 on a USB drive.

Installing Backtrack 4 with UnetBootin

It is as simple as selecting the image we want to write to the USB drive, the drive to write it to, and then clicking the 'OK' button. Warning: Make sure you pick the correct destination drive. You don't want to shoot yourself in the foot. 🙂

Partition the USB thumbdrive

The first step is to boot up Backtrack 4.  With the release of Backtrack 4 Final, a 4 GB drive is required if we are going to enable persistence.  For Backtrack 3 and Backtrack 4 Beta, we could get away with a 2GB drive.  We will also need to figure out which drive is our target drive. The following command will show the drives available and you can determine from that which is the new USB drive:

dmesg | egrep hd.\|sd.

We need to partition and format the drive as follows:

  1. The first partition needs to be a primary partition of at least 1.5 GB and set to type vfat. Also remember to make this partition active when you are creating it. Otherwise you might have some boot problems.
  2. The second Partition can be the rest of the thumb drive.

Below are the steps to take to get the drive partitioned and formatted. These steps are taken from this video on Offensive Security website. A '# blah blah' indicates a comment and is not part of the command and user typed commands are bolded. One note, we will need to delete any existing partitions on the drive.

fdisk /dev/sda # use the appropriate drive letter for your system

# delete existing partitions. There may be more than one.

Command (m for help): d
Partition number (1-4): 1

# create the first partition

Command (m for help): n
Command action
e   extended
p   primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-522, default 1): <enter>
Using default value 1
Last cylinder, +cylinders or +size{K,M,G} (1-522, default 522): +1500M

#create the second partition

Command (m for help): n
Command action
e   extended
p   primary partition (1-4)
p
Partition number (1-4): 2
First cylinder (193-522, default 193): <enter>
Using default value 193
Last cylinder, +cylinders or +size{K,M,G} (193-522, default 522): <enter>
Using default value 522

# Setting the partition type for the first partition to vfat/fat32

Command (m for help): t
Partition number (1-4): 1
Hex code (type L to list codes): b
Changed system type of partition 1 to b (W95 FAT32)

# Setting the partition type for the second partition to Linux

Command (m for help): t
Partition number (1-4): 2
Hex code (type L to list codes): 83

# Setting the first partition active

Command (m for help): a
Partition number (1-4): 1

Command (m for help): w

# now it is time to format the partitions

mkfs.vfat /dev/sdb1
mkfs.ext3 -b 4096 -L casper-rw /dev/sdb2

Two things to notice above in the format commands; 1) we are using ext3 instead of ext2 and 2) you must include the -L casper-rw portion of the command. Being able to use ext3 is great because of journaling. The -L casper-rw option helps us get around the problem we had where we had to enter the partition name in order to get persistence working. As you will see, that is no longer necessary. WooHoo!

So go ahead and partition and format the drive according the layout above.

Make it a bootable Backtrack 4 USB thumb drive

In the previous version of this how-to, we used UNetBootin to copy the ISO to the thumb drive and make it bootable. That required us to boot back to windows and then back again to Backtrack. We are changing to doing everything from Backtrack now. These steps are also taken from the Offensive Security video mentioned above.

The steps are basically:

  1. Mount the first partition.
  2. Copy the Backtrack files to it.
  3. Install grub.

Following are the commands to execute. Again, '#' denote comments and user typed commands are in bolded.

# mount the first partition, sda1 in my case.

mkdir /mnt/sda1
mount /dev/sda1 /mnt/sda1

# copy the files, you will need to find where the ISO is mounted on your system.

cd /mnt/sda1
rsync -r /media/cdrom0/* .

# install grub

grub-install --no-floppy --root-directory=/mnt/sda1 /dev/sda

That's it. We now have a bootable Backtrack 4 USB thumb drive. Now on to setting up persistent changes.

Persistent Changes

This is done much differently and more easily than it was in Backtrack 4 Beta or Backtrack 3. First of all, for basic persistence, we don't have to do anything at all. There is already a menu option that takes care of it for us. Unfortunately, it is only for console mode so we need to make a couple changes.

We want to do the following things:

  1. Change the default boot selection to persistent.
  2. Set the resolution for our gui.

To do so, do the following. Again, '#' ...comment....user typed...blah blah.

cd /mnt/sda1/boot/grub

vi menu.lst

# change the default line below to 'default 4' and append 'vga=0x317' (that's a zero) to the kernel line to set the resolution to 1024x768

# By default, boot the first entry.
default 4
.
.
.
title                Start Persistent Live CD
kernel           /boot/vmlinuz BOOT=casper boot=casper persistent rw quiet vga=0x317
initrd            /boot/initrd.gz

:wq

Here is my entire menu.lst file for reference.

# By default, boot the first entry.
default 4

# Boot automatically after 30 secs.
timeout 30

splashimage=/boot/grub/bt4.xpm.gz

title                Start BackTrack FrameBuffer (1024x768)
kernel                /boot/vmlinuz BOOT=casper boot=casper nopersistent rw quiet vga=0x317
initrd                /boot/initrd.gz

title                Start BackTrack FrameBuffer (800x600)
kernel                /boot/vmlinuz BOOT=casper boot=casper nopersistent rw quiet vga=0x314
initrd                /boot/initrd800.gz

title                Start BackTrack Forensics (no swap)
kernel                /boot/vmlinuz BOOT=casper boot=casper nopersistent rw vga=0x317
initrd                /boot/initrdfr.gz

title                Start BackTrack in Safe Graphical Mode
kernel                /boot/vmlinuz BOOT=casper boot=casper xforcevesa rw quiet
initrd                /boot/initrd.gz

title                Start Persistent Live CD
kernel                /boot/vmlinuz BOOT=casper boot=casper persistent rw quiet vga=0x317

initrd                /boot/initrd.gz

title                Start BackTrack in Text Mode
kernel                /boot/vmlinuz BOOT=casper boot=casper nopersistent textonly rw quiet
initrd                /boot/initrd.gz

title                Start BackTrack Graphical Mode from RAM
kernel                /boot/vmlinuz BOOT=casper boot=casper toram nopersistent rw quiet
initrd                /boot/initrd.gz

title                Memory Test
kernel                /boot/memtest86+.bin

title                Boot the First Hard Disk
root                (hd0)
chainloader +1

Reboot and either select "Start Persistent Live CD" or just wait since we set it to auto-boot to persistent mode. To test it, create a file and reboot again. If your file is still there, everything is golden.

Install Nessus

Now that our changes are saved from boot to boot, we can install things and they won't disappear on us 🙂

Download the Ubuntu Nessus and NessusClient packages from nessus.org. The 32-bit 8.10 version worked fine for me.

Again, with Backtrack 4 things are little easier. To install the Nessus server, simply execute the following command to install the package.

dpkg --install Nessus-4.0.2-ubuntu810_i386.deb

Things used to be a little bit more complicated for the client, but with the release of the pre-final version, it is just as easy as installing as the server.

dpkg --install NessusClient-4.0.2-ubuntu810_i386.deb

Finally it's time to configure Nessus. Execute each of the following and follow the prompts. My entries are below for fun.

#create server certificate

/opt/nessus/sbin/nessus-mkcert

This script will now ask you the relevant information to create the SSL
certificate of Nessus. Note that this information will *NOT* be sent to
anybody (everything stays local), but anyone with the ability to connect to your
Nessus daemon will be able to retrieve this information.

CA certificate life time in days [1460]:<enter>
Server certificate life time in days [365]: <enter>
Your country (two letter code) [FR]:US
Your state or province name [none]:Confused
Your location (e.g. town) [Paris]:Somewhere In Time
Your organization [Nessus Users United]:<enter>
.
.
.
Congratulations. Your server certificate was properly created.
.
.

# add user

/opt/nessus/sbin/nessus-adduser

Login :Me
Authentication (pass/cert) : [pass]<enter>
Login password :
Login password (again) :
Do you want this user to be a Nessus 'admin' user ? (can upload plugins, etc...) (y/n) [n]:y
User rules
----------
nessusd has a rules system which allows you to restrict the hosts
that Me has the right to test. For instance, you may want
him to be able to scan his own host only.

Please see the nessus-adduser manual for the rules syntax

Enter the rules for this user, and enter a BLANK LINE once you are done :
(the user can have an empty rules set)

Login             : Me
Password         : ***********
This user will have 'admin' privileges within the Nessus server
Rules             :
Is that ok ? (y/n) [y]y
User added

We want to disable Nessus starting at boot. We are going to do some things a little later than require that Nessus not be running at boot.

/usr/sbin/update-rc.d -f nessusd remove

This command does not remove the Nessus start scripts. It only removes the links that cause Nessus to start at boot time.

The next thing we need to do is register our installation so we can get the plugin feed. You need to go here and request a key. That is a link to the free feed for home use. Use appropriately.

Once you have your key. Execute the following to update your plugins. Please note that there are two dashes before register in the nessus-fetch line below. They can display as one sometimes.

/opt/nessus/bin/nessus-fetch --register [your feed code here]

When that is done, and it is going to take a few minutes, you are ready to start the server and client. Be aware that with version 4.0, while the command to start returns quickly, the actual starting of the service may take a minute or two. In many cases, I have actually had to reboot before Nessus started working. You can use netstat -na to check that the server is listening on port 1241.

/etc/init.d/nessusd start
/opt/nessus/bin/NessusClient

Woohoo, time to find those vulnerabilities.

Configure Encryption

Since we are using this tool to poke at peoples networks and systems, with permission of course, it is very important that the information we find be protected. To do this, we are going to setup an encrypted volume that will eventually become our home directory.

This can be done with the gui or via command line. We will be using the gui because we need to be able to format the volume with ext3 and, as yet, I have not been able to figure out how to do that via the command line on linux. Click on the images to see a larger version.

Truecrypt Configuration (Time 0_00_12;24)

Truecrypt Configuration (Time 0_00_16;18)

Truecrypt Configuration (Time 0_00_28;12)

Truecrypt Configuration (Time 0_00_28;12)

Truecrypt Configuration (Time 0_00_29;00)

Truecrypt_size

Truecrypt Configuration (Time 0_00_41;18)

Truecrypt Configuration (Time 0_00_44;24)

Truecrypt_type

Truecrypt Configuration (Time 0_00_50;18)

You will get a message that the volume was successful created. Click on the 'OK' button, then exit the Truecrypt gui, both the 'Create Volume' windows and the main windows. We want to be back at the command prompt at this point.

If you want to test the your filesystem, execute the following, note the -k '' is two single quotes, not a double quote:

truecrypt -t -k '' --protect-hidden=no /my_secret_stuff /media/truecrypt1
mount
cd /media/truecrypt1
df .

This will show that the volume is mounted and the amount of disk space you have left. Our next step is to have this volume mounted when we log in. We do this by editing the root user's .profile file. Add the truecrypt command above to root's .profile so it looks like this:

# ~/.profile: executed by Bourne-compatible login shells.
if [ "$BASH" ]; then
  if [ -f ~/.bashrc ]; then
    . ~/.bashrc
  fi
fi

truecrypt -t -k '' --protect-hidden=no /my_secret_stuff /media/truecrypt1

mesg n

The next time you reboot you will be asked for the password for the volume and it will be mounted for you.

Now it is time to tweak a few tings

Tweak a few things

The first thing we are going to do is go ahead and configure networking to start at boot time. It's convenient and easy to disable if we need to. All we have to do is execute the following command.

/usr/sbin/update-rc.d networking defaults

Next thing we want to do is make sure all our tools and the system itself is up-to-date. First execute the following:

apt-get update

This is update the software repository information. Next, execute the this command:

apt-get upgrade

The system will determine if there is anything that needs to be updated and then prompt you to continue. Individual packages can be updated by including the package name after upgrade.

This next bit is interesting and I was surprised it worked. We are going to reset the root user's home directory during the login process to the mounted truecrypt volume. This will ensure that anything written to the home directory will be encrypted.  The following commands will set this up for us:

cd /media/truecrypt1

rsync -r --links /root/ .

# add the bold lines below

vi /root/.profile

# ~/.profile: executed by Bourne-compatible login shells.
if [ "$BASH" ]; then
  if [ -f ~/.bashrc ]; then
    . ~/.bashrc
  fi
fi

truecrypt -t -k '' --protect-hidden=no /my_secret_stuff /media/truecrypt1

export HOME=/media/truecrypt1
export HISTFILE=/media/truecrypt1/.bash_history

cd

mesg n

:wq

The next time you reboot, when you are finally in the system, your home directory will be /media/truecrypt1.

There is one last thing we want to do. We want to change nessus to log to the encrypted volume. This is very easy. The file that controls this is /opt/nessus/etc/nessus/nessusd.conf. We need to create a place for the log files to go. So execute the following

cd /media/truecrypt1

mkdir -p nessus/logs

Once you have done that, edit the /opt/nessus/etc/nessus/nessusd.conf file and change this:

.
.
.
# Log file :
logfile = /opt/nessus/var/nessus/logs/nessusd.messages

# Shall we log every details of the attack ? (disk intensive)
log_whole_attack = no

# Dump file for debugging output
dumpfile = /opt/nessus/var/nessus/logs/nessusd.dump
.
.
.

to this:

.
.
.
# Log file :
logfile = /media/truecrypt1/nessus/logs/nessusd.messages

# Shall we log every details of the attack ? (disk intensive)
log_whole_attack = no

# Dump file for debugging output
dumpfile = /media/truecrypt1/nessus/logs/nessusd.dump
.
.
.

That's it. You are all done now. Go forth and have fun. 🙂

Please let me know of any corrections or changes that should be made. You can leave a comment or send me a note at kriggins [at] infosecramblings.com.

Kevin

Creative Commons License
Backtrack 4 – USB/Persistent Changes/Nessus by Kevin Riggins is licensed under a Creative Commons Attribution-Share Alike 3.0 United States License.

{ 2 comments… read them below or add one }

Frank May 12, 2010 at 10:31 pm

When I try to format the sdb1 partition with the command
mkfs.vfat -F 32 -n BT4 /dev/sdb1

It returns
mkfs.vfat: /dev/sdb1 contains a mounted file system.

I’m pretty sure because of this, it is not formatting the partition, which is screwing up my install. Any solutions?

Reply

kriggins May 20, 2010 at 7:50 pm

Hi Frank,

Two things come to mind:
1) You are trying to format the partition that you have booted from. Make sure that you have the correct target drive device name.
2) The target drive already had a filesystem on it that got mounted somehow. I have seen this happen before. You should be able to dismount the filesystem using umount.

Kevin

Reply

Leave a Comment

{ 2 trackbacks }